ANSI_ANSLG C81.63—2006 Standard
Bayonet base gauges
BA9 "Go" Gauge for BA9 Miniature Bayonet Based Lamps 3-10-1
BA9 "Not-go" Gauge for BA9 Miniature Bayonet Based lamps 3-11-1
BA15 "Go" Gauge for BA15 Candelabra Bayonet Based Lamps 3-20-2
BA15 "Not-Go" Gauge for BA15 Candelabra Bayonet Based Lamps 3-21-1
BY22d Gauges for testing the insertion of caps in lampholders 7006-4A-2
BY22d "Not-go" gauges for caps on finished lamps 7006-10-8
BY22d "Go" gauge for cap on finished lamp 7006-17A-1
Edison screw base gauges
E5 "Go" gauge for caps on finished lamps 7006-25D-1
E5 "Not go" gauge for caps on finished lamps 7006-25E-1
E10 "Go" gauge for caps 7006-27A-2
E10 "Not go" gauge for caps 7006-28E-1
E11 "Go" gauge for caps on finished lamps 7006-6-1
E12 "Go" gauge for caps on finished lamps 7006-27H-1
E12 Additional "Go" gauge for caps on finished lamps 7006-27J-1
E12 "Not go" gauge for caps on finished lamps 7006-28C-1
E12 Gauge for finished lamps fitted with caps for testing contact making 7006-32-1
E17 Gauge for testing contact-making of lamps fitted with caps 7006-26D-1
E17 "Go" gauge for caps on finished lamps 7006-27K-1
E17 "Not go" gauge for caps on finished lamps 7006-28F-1
E26, E26d,E26/50x39 "Go" gauge for caps 7006-27D-2
E26,E26d,E26/50x39 "Not go" gauge for caps 7006-29L-4
E26/53x39,E26, E26d,E26/50x39 Gauge for testing contact-making of lamps fitted with caps 7006-29-3
E26d Gauge for caps on finished lamps for testing protection against accidental contact. 7006-29A-2
E26d Gauge with reference diameter of 23mm (.906") for caps 7006-29B-2
E26d Gauge with reference diameter of 13.2mm (.520") for caps 7006-29C-2
E26d Gauge with reference diameter of 10.4mm (.410") for caps 7006-29D-1
E26/53x39 Threaded "Go" Gauges for Unmounted E26/53x39 Skirted Basesand E26/53x39 Medium Screw Based Lamps 3-160-2
E26/53x39 Gauge for Testing Contact Making of E26/50x39 Skirted Medium Screw Based Lamps 3-166-2
E39, E39d, EX39 Gauge for finished lamps fitted with E39 caps for testing contact making 7006-24A-1
E39, E39d, EX39 "Go" gauge for caps on finished lamps 7006-24B-1
E39, EP39, E39d,EX39 "Not go" gauge for caps on finished lamps 7006-24C-1
EP39 Threaded "Go" Gauge for Position Oriented Mogul Screw Based Lamps 3-202-2
EP39 Gauge for Testing Contact Making of Position Oriented Mogul Screw Based Lamps 3-203-2
Single pin base gauges
Fa8 "Go" gauge for single pin cap 7006-40-1
Fa8 "Not go" gauge for single pin cap 7006-40A-1
Fc2 Gauge for checking alignment of caps on finished lamps 7006-114-1
Multiple pin base gauges
G1.27, GX1.27, G2.54, GX2.54, G3.17 "Go" gauges for bi-pin lamp caps on finished lamps 7006-4-1
G4 "Go" and "Not go" gauges for bi-pin lamp bases 7006-72-1
GU4 "Go" and "Not-go" gauge for bi-pin bases 7006-108-2
GZ4 "Go" gauge for bi-pin lamp bases 7006-67-1
G5 "Go" and "Not-Go" Gauge for Miniature Bi-pin Bases on Finished Lamps 3-310-2
G5 Pin Torsion Test Device for G5 Miniature Bi-pin Base 3-311-1
G5.3 Gauge for bi-pin cap G5.3 on finished lamps 7006-73-1
GU5.3 "Go" and "Not-go" gauge for bi-pin bases 7006-109-1
GX5.3 "Go" and "Not go" gauge for bi-pin lamp base 7006-73B-2
GY5.3 "Go" and "Not go" gauge for bi-pin lamp base 7006-73C-2
G/GX/GY/GZ6.35 "Go" and "Not go" gauges for bases 7006-61-5
G/GX/GY6.35 "Go" gauges for bases 7006-61A-1
GZ6.35 "Go" gauge for bi-pin lamp bases 7006-59B-1
2G7, 2GX7 "Go" and "Not-go" gauge for caps on finished lamps 7006-102-1
GU7 "Go" and "Not go" gauge for bases 7006-113-2
G7.9, GX7.9 "Go" Gauges for caps 7006-139-1
GR8 "Go" gauge for unmounted caps 7006-68-2
GR8 Gauge for caps to ensure entry of maximum lampholders and to check pin spacing and length 7006-68A-2
GR8, GR10q "Go" gauges for checking the pins of caps on finished lamps 7006-68E-1
GR8, GR10q "Go" and "Not go" gauge for checking the pins of caps (Not for use on finished lamps) 7006-68F-1
2G8 “Go” gauge for caps 7006-141-1
2G8 “Go” gauge for cap pins 7006-141K-1
2G8 “Go” and “Not go” gauge for pin diameters of caps 7006-141H-1
2G8 “Not go” gauge for keys of caps 7006-141J-1
G8.5 "Go" and "Not go" gauge for bases 7006-122-1
GX8.5 “Go” and “Not go” Base 7006-143-1
G9 "Go" gauge for base 7006-129-1
G9 "Not go" gauge for base 7006-129A-1
G9.5 "Go" Gauge for G9.5 based lamps 7006-70D-1
GY9.5, GZ9.5 Gauges for bi-pin caps GY9.5 and GZ9.5 on finished lamps 7006-70C-2
2G10 "Go" gauge for caps 7006-118-1
G10q "Go" gauge for four-pin circular fluorescent lamp base on finished lamps 7006-79-2
GR10q "Go" gauge for unmounted caps 7006-77-2
GR10q Gauge for caps to ensure entry of maximum lampholders and to check pin spacing and length 7006-77A-2
GU10 “Go” gauge for GU10 base 7006-121-1
GX10 “Go” and “Not go” Base Gauge 7006-144-1
GY10 “Go” and “Not go” Base Gauge 7006-145-1
GZ10 “Go” and “Not go” gauge for GZ10 base 7006-120-1
2G11 "Go" gauge for caps on finished lamps 7006-82-1
G12 "Go" and "Not go" gauge for caps on finished lamps 7006-80-1
GX12 “Go” and “Not go” gauge for caps 7006-135-1
G13 "Go" and "Not go" Gauge for Medium Bi-pin Bases on Finished Lamps 3-406-2
G13, G5 "Go" and "Not go" Gauge for Unmounted G5 and G13 Bi-pin Bases 3-407-2
G13 Pin Torsion Device for Medium Bi-pin Bases 3-410-1
2G13 "Go" Gauges for 2G13 Bases 3-420-3
2GX13 "Go" and "Not go" gauge "A" for caps 7006-125A-1
2GX13 "Go" and "Not go" gauge "A" for caps 7006-125B-1
G16d "Go" Gauge for Mogul and Extended Mogul End Prong Bases 3-430-3
G17t, G17q "Go" Gauge for Based Lamps (Pin Arrangement No. 1) 3-439-1
GX17q "Go" Gauge for Based Lamps (Pin Arrangement No. 2) 3-440-1
G20 "Go" Gauge for Mogul Bi-pin Bases on Finished Lamps 3-452-1
G22 "Go" and "Not go" gauge for G22 medium bi-post based lamps 7006-75-1
Multiple pin base gauges continued
G23 "Go" and "Not go" gauge for bi-pin caps on finished lamps 7006-69-2
GX23 "Go" and "Not go" gauge for bi-pin cap on finished lamps 7006-86-1
G24, GX24, GY24 "Go" and "Not go" gauges for caps 7006-78-5
G32d, G32q "Go" and "Not go" gauges for caps on finished lamps 7006-87-2
G38 "Go" gauge for bi-pin caps and bases G38 on finished lamps 7006-76-1
G38 "Go" and "Not go" gauge for pins of bi-pin caps and bases G38 on finished lamps 7006-76A-1
Prefocus base gauges
PG12, PGX12 "Go" and "Not go" gauges for caps on finished lamps 7006-81-3
PG13, PGJ13 "Go" gauge "A" for caps 7006-107-3
PG13, PGJ13 "Go" gauge "B" for caps 7006-107B-1
PG13, PGJ13 "Go" and "Not go" gauge for caps 7006-107C-1
PG20, PGU20 Gauge for testing the springs of caps 7006-127-1
PG20, PGU20 Gauge for testing the contacts of caps 7006-127B-2
PK22s Combined "Go" gauge for caps on finished lamps 7006-66-2
PX26d “Go’ gauge for prefocus cap 7006-5-2
PX26d “Go” and “Not go” gauge for tabs of prefocus cap 7006-5A-1
PX26d “Not go” gauge for dimension Mmin of prefocus cap 7006-5B-2
P28s "Go" gauge for cap on finished lamps 7006-42-1
P30 "Go" and "Not go" Gauge for Diameter of Collar on P30 Prefocus Bases on Finished Lamps 3-709-1
P38t “Go” gauge for caps 7006-133-1
P38t “Not go” gauge for caps 7006-133A-1
P38t Gauge for dimension Y maximum 7006-133B-1
P40 "Go" Gauge for P40 Mogul Prefocus Based Lamps and for Unmounted Bases 3-715-1
P43t “Go” gauge for caps 7006-39-1
P43t “Not go” gauge for dimension Mmin of caps 7006-39A-3
P43t Gauge for dimension Y maximum 7006-39B-2
Recessed base gauges
R17d "Go" and "Not go" Gauge for R17d Recessed Double Contact Bases on Finished Lamps 3-777-1
Flanged, grooved, and side base gauges
SX4 "Go" Ring Gauge for SX4 Submidget Flanged Based Lamps 7006-97-1
SX4 "Not go" Ring Gauge for SX4 Submidget Flanged Based Lamps 7006-97A-1
Wedge base gauges
W2.1x4.9d Minimum and Maximum Retention Gauges 3-919-1
W2.1x9.2d Minimum and Maximum Retention Gauges 3-920-1
W2.5x16 "Go" gauge for bases 7006-104-1
WU2.5x16 "Go" gauge for bases 7006-104H-1
WX2.5x16 "Go" gauge for bases 7006-104B-1
WY2.5x16 "Go" gauge for bases 7006-104D-1
WZ2.5x16 "Go" gauge for bases 7006-104F-1
WX(Y)3x16q "Not go” gauge for bases 7006-105A-2
W(X)(Y)(Z) “Go” gauge for bases 7006-106-3
Eason Wang