Application:
Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.
Conforms To:
IEC60968-1, IEC60061-3
Specification:
|
Standard
|
Product Name |
| IEC60061-3,7006-142-1 | GX53 Go and not go gauge for caps |
| IEC60061-3,7006-142D-1 | GX53 Not go gauge for caps |
| IEC60061-3,7006-142E-1 | GX53 Go and not go gauge for checking keyways in caps |
| IEC60061-3,7006-142F-1 | GX53 Not go gauge for checking keyways in caps |
| IEC60061-3,7006-109-1 | GU5.3 Go and Not go Gauge for Bi-Pin Bases |
| IEC60061-3,7006-109A-1 | GU5.3 Gauges for checking maximum insertion force and maximum withdrawal force in lampholders |
| IEC60061-3,7006-109B-1 | GU5.3 Gauges for checking the minimum retention force in lampholders |
| IEC60061-3,7006-109C-2 | GU5.3 "Go" gauge for lampholders |
| IEC60061-3,7006-73G-2 | GU5.3 Single pin gauge for checking contact making in lampholders |
Eason Wang