• TAGS

Latest news

• Safety Testing / Surge Testing
• Danish Plug and Socket-outlet Gauge SB
• Electrical Electronic Enclosure NEMA S
• E26 vs E27, Which one is right for my
• AC 0-2/20mA / DC 0-2/10mA 0~5kv Hipot
• Hi-Pot Testing and Definition

Contact us

• ADD: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
• TEL: +86-755-33168386
• FAX: +86-755-61605199
• E-mail: sales@china-gauges.com

  > TAGS

• Rigid Test Finger Probe with 75N Thrust

  Rigid Test Finger Probe is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA,

• IEC 60335-2-9 Figure 102 Test Load for Testing Rot

  The testing rotating spits load complies with IEC60335-2-9 Figure 102, the equivalent mass is about 4.5kg, made of stainless steel.

• Abrasion Resistance Tester of IEC 60335-1 and IEC

  Abrasion Resistance Tester according to IEC 60950 figure 2K and clause 2.10.8.4, IEC 60335-1 clause 21.2, used to check abrasion strength of printed circuit boards or the insulating accessible parts o

• Scratch Resistant Pin Electrical Safety Test Probe

  The Test Probe is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21.

• IEC 60335-1 Test Probe Kits

  Meets IEC 60335-1. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. Safety Test Probe

• 76mm Flat End Test Rod of IEC 60335-2-16

  Conform to the IEC 60335-2-16 clause 22.102. Used to test concealment of the reset button of a protective device.

• Test Probe 11 with Cable

  The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IR

• IEC 60238 Figure 16 Standard Test Finger

  The Jointed Test Finger is a precision test probe made according to IEC 60238 Figure 16 and IEC 61032 Figure 2 (Test probe B) and is used to simulate a human finger. It is also used by the standards o

• Impact Test Vessel of IEC 60335-2-6 Clause 21.102

  Impact Test Vessel of IEC 60335-2-6 Clause 21.102

• Vessel for Testing Induction Hotplates of IEC 6033

  one set with 5 pcs, the diameter is: 110 mm, 145mm, 180mm, 220mm, 300mm; Base and wall thickness: 2mm±0.5mm; The vessel is made of low carbon steel having maximum carbon content of 0.08%.