-
It is a test a probe with the 20N force to test the electric f...
-
To calibrate the gauge, a push force of 1 N is applied on the ...
-
Test Finger Nail meets the standard requirements of IEC60335 U...
-
The apparatus shall be so designed that suspended foreign bodi...
-
Diameter: 3mm , length: 100mm . Used to verify protection agai...
-
This probe conforms to the standard requirement of UL1278 Fig ...
-
Mainly used for the inspection to prevent the body touch dange...
-
UL Rigid test finger 130A meets the standard requirements of U...
-
The probes referenced in Table 9.1 and illustrated in Figures ...
-
The probe is used for the enamel wire, shall be applied to any...
-
The rotor of a motor, a pulley, a belt, a gear, a fan, or othe...
-
It conforms to standard requirement of UL1278 Fig 10.4. The ha...
> Test Probe,Test Finger,Test Pin
Eason Wang